Spring Special – Unia Cultivators
- All Unia models
- Limited time
- 0% interest – terms & conditions apply
Call Murray – 027 485 7378
Unia Cross II – Is a new release of the market’s well-known three-tine unit designed for tillage in a simplified system.
Cross II
- is a new model cultivator with tynes, levelling discs and rear u roller.
- Working depth – 5 – 30cm
ROBUST TYNES – have spring protection, large diamond greaseable pivot pins.
- 600 kg breakout force will handle harsh conditions.
- Hard faced point or Durum carbide tiles.
BOLT ON WINGS – allows disturbance of complete soil profile.
- Wings can be hard faced or fitted with Durum carbide tiles.
Rear U roller 600mm diameter leaves good flat consolidated drilling surface.
5 spoke wheels are robust.
Ground clearance under frame is 85 cms.
Power requirement 150 – 200 hp.
Front hitch cat III.
Hydraulic adjustment of working depth.
Great introductory pricing.
Grader Blade Extreme Duty 100hp – 150h
The Extreme Duty Grader Blade has hydraulic cylinders to adjust the offset of the arm, blade angle, the tilt and rear wheels to control the depth of cut.
- 10 ft wide moleboard
- Moleboard thickness 8mm
- Kingpin 100mm
- Cutting edge high carbon (reversable 12mm thickness / 150mm height)
- Weight 840kg
$18,800.00 + GST
CROSS Cultivators in stock and ready to demonstrate
3 & 3.5 metre Cross Drive
Complete with:
- Tynes with points/wings
- Rear harrow
- Discs
-
Rear roller wheels with lug tyres
4 metre Cross HP
Complete with:
- Tynes with points/wings
- Rear Harrow
- Discs
- Rear roller
- Double U 5 spoke rollers
Ring Murray now on 027 485 7378
Aad Van Leeuwen says –
“We cultivated 250 hectares for maize last season with the UNIA CROSS HP Cultivator. It left a good seedbed for our maize planter and the crop was really good. We are really pleased with this implement”
6 metre Roller Drill
Complete with:
- Unia Terris breaker ring roller
- Fitted with Unias own 550 Litre hopper
- Electric fan
- Seed rollers for fine/larger seeds
- Front hydraulic paddles
Ring Murray now on 027 485 7378
Shibaura ST-460 Tractors – Available now
- High quality tractors fully built in Japan
- Strong 60HP 2.2 litre turbo engine
- Transmission with synchro forward-reverse ideal for loader use
- Easy to use electric control of PTO engagement
- Power steering and 4 wheel drive suits wide range of applications
Cabin
- Two access doors
- Filtered air for comfort
- Quiet environment
Options available:
Loader – Self level with 4 in 1 bucket
- Use as front blade for levelling materials
- Front grab for picking up materials
- Rear opening for controlled spreading of materials
- When closed reverts to standard buck for transporting materials
NEW VALTRA A SERIES 115 HP TRACTORS
**** Limited stock – Need to be quick ****
- 4 speed power shift
- Valtras smooth power shuttle
- Large 98 litre hydraulic pump
- Well appointed cabin with suspension for driver comfort
- Limited Stock – Need to be quick
Purchase one now and get the following benefits –
- Free self levelling loader fitted
- Low interest rates available*
* Terms and conditions apply
PHONE GRANT NOW ON 027 434 7325
NEW VALTRA Q-285 ARRIVES LOOKING SMART IN ITS RED LIVERY
Come and have a drive or ring Grant 027 434 7325 for a demo on your farm.
Demonstrations available now!
NEW VALTRA T-175E TRACTORS HERE AND ARRIVING…….
Capable Tier 3 Engines
7.4 Litre engines deliver strong pulling power at all engine revs.
T-175E Eco Mode
Perfect for heavy pulling. Ecopower model that fives you the option to select a low revolution engine curve to optimize fuel consumption. Engine torque increases while the top revs are reduced by 20% reducing also engine noise vibration and enabling 10% in fuel savings. Reduced revs and piston speed mean a longer life for both your engine and your tractor.
T-175E Power and Boost Mode
When you need more muscle Sigma Power delivers extra power for PTO work. An engine boost of 15HP is available. A start boost feature gets you going even with heavy loads providing power for PTO work and transport speeds.
Performance of T-175E Tier 3 Engine
150KW (203HP @ 1900 RPM)
UNBEATABLE VALTRA TRANSMISSION
Valtras T Series transmissions are designed and made by Valtra and the 5th generation brings again new features. With Valtra you can drive your Powershift tractor like a CVT. In automatic modes the transmission does the shifting based on your acceleration and torque requirements, so you always get the best fuel economy and the power you need.
We sell mostly VERSU Variant T Series
Complete with:
- 5 Step powershift
- Load sensing hydraulics
- High capacity hydraulic pumps
- Smart touch user interface
- Smart A-pillar display
- New faster range shifting on these new 5 series
ARES FRONT SUSPENSION
Ares front suspension with 2 airbags/cabin suspension/ and an air seat gives the ultimate ride comfort.
NEW CABIN
Introduced on the four series has crossed over to these new five series.
ORDER WITH EXTRA FEATURES
Like reverse drive for specialist jobs like mulching/mowing where the operator can oversee the implement.
Front end loaders in stock to fit the T-175E.
AVAILABLE WITH FRONT LINKAGE AND PTO
We find the correct ballasting is easier to achieve by fitting the 2 piece front weight to the front linkage.
Hydraulic top links available
Rear air brake controller/rear hydraulic brake controller – for trailers or sileage wagons.
Finance
Talk to Grant now on 027 434 7325 about the low low finance rates available from Agco Finance with flexible repayment programs to suit your needs.